solder wire

Meira has spent the last several weeks soldering wires in place.

Wash hands with soap and water after handling solder wire.

Contact us for details on flux and cored solder wire products.

Hold the spool of solder wire in your skilled hand, out of the way.

As we all know, this is one of many methods that modellers use to solder wires to rails.

Answer: as the track is laid, solder wires to the undersides of the rails.

After graduating, he landed a job at General Electric soldering wires.

The heated metal should melt the solder wire instantly and draw it into the joint.

Melt the end of a small solder wire and shove the soft liquid into the lock with its key.

Buy solid solder wire for most jobs.

In particular, take care with the underside as there may be protruding soldered wires here that will scrape inside the case.

Hollow solder wire containing flux is also available.

I: only he weren't such a single-minded specialist with his m head full of valves and soldered wires, she wouldn't have brought herself to this.

If the port is occupied you will have to resort to soldering wires to the relevent pins on the board.

With silver soldering, small pieces of solder wire are placed onto the metal prior to heating.

After he finished high school, he spent a year sawing boards and soldering wires in an electronics shop.

If you were wiring a conventional circuit board, say, you'd take a resistor or other component and solder wires to either end.

When sufficient solder is applied, the solder wire is removed.

In the evening I soldered wires to the headset and microphone sockets in the overhead space.

While a plated-through-holes process is most convenient, it is possible to bridge the two sides using soldered wires where necessary.

If access is difficult, solder wires to each end of a blown fuse and refit the fuse.

Reviresco helpfully suggests soldering wire (not included).

If the metals being joined contain iron or are galvanized, purchase hollow solder wire containing acid flux.

Via holes that only connect one layer to another, without having soldering wires or pins into the hole, do not normally need thermal restriction.

When visually inspected, a good solder joint will appear smooth and shiny, with the outline of the soldered wire clearly visible.