Next, drive two roofing nails through the patch, about an inch from each side.

Roofing nails spread out on the street are effective in stopping a patrol car.

I dumped two pounds of roofing nails along the ruts.

Anchor it to the wall with galvanized staples or roofing nails.

Drive a couple of roofing nails along the top edge of the new flashing.

The roofing nails were to be used as ice picks, for clawing forward on one's stomach.

Then drive galvanized roofing nails along both sides of the seam to nail it down.

Another method is to drive large-headed roofing nails along the lower edges of joists.

He thought it was filled with roofing nails."

Shadow's temples felt as if they had been reattached to the rest of his skull with roofing nails.

Nail the patch around the perimeter, using roofing nails spaced an inch or two apart.

Hammer a new roofing nail into the shingle about an inch to one side of the sealed hole.

Some nailers are available for stapling and for driving roofing nails.

Fasten the patch with roofing nails spaced no more than three inches apart around the perimeter.

Before you can position the replacement, you'll have to remove the torn shingle and also the roofing nails that secure it.

Drive roofing nails into the flange, and cover these with roofing cement.

Fasten each one at the corners with galvanized roofing nails at least two inches long.

The tar paper of the kennel roof had begun to fray around roofing nails, which seemed to be coming loose.

Prying out roofing nails with a prybar usually damages the shingle beneath the nail head.

Secure it with roofing nails.

Press the larger patch onto the first one, and nail it down with large-head galvanized roofing nails three inches apart around the edges.

A magnet removes roofing nails.

The street was strewn with glass and bent roofing nails, and the interiors of shops were blackened by smoke.

Standing half-erect to avoid the roofing nails jutting down from above, I balanced on two rafters and looked around to get my bearings.

Position the vent on the peak then fasten it down by driving gasketed roofing nails through the mounting flanges.