maximum working pressure

Simple hydraulic cylinders have a maximum working pressure of about 70 bar.

Its maximum working pressure is limited by spring-loaded safety valves.

Maximum working pressure is limited as part of the design of an exhaust brake.

Surge control products have been used in many industries to protect the maximum working pressure of hydraulic system for decades.

It is important to note that the application of the thermoplastic coating does not increase the maximum working pressure.

Maximum working pressure of 6 bar makes it ideal for taller buildings or higher working temperatures.

Maximum working pressure is 10 bar.

Capable of achieving a maximum working pressure of 69 MPa or greater; and 2.

Ionic radiators have a maximum working pressure of 8 bar, and carry a 10 year guarantee against manufactured defects.

Maximum working pressure 1000kPa flow pressure.

The safety valves are set to release excess steam to avoid going above the boiler's maximum working pressure between 150 and 100 psi.

When she was re-launched in 1980 an all-steel design was again specified, although this time rated at a maximum working pressure of 150 psi.

Depending on engine speed, this pressure can easily reach up to 60 PSI maximum working pressure.

A few minutes later, as the midget power plant reached its maximum working pressure, Tom added, "Now I'll start reducing the chamber pressure."

Pressure tested to 14 bar. Maximum working pressure 8 bar. Site Requirements All work should be carried out by a suitably qualified person to comply with all water byelaws.

MWP, Maximum Working Pressure or MFP, Maximum Fill Pressure are set pressures which are rated at a standard filling temperature.

Paragraph UCI-101 requires that the maximum working pressure of cast iron vessels or vessel parts, based on testing one of them to destruction, be limited to 1/(6.67) of the destruction test pressure.

Carefully add 10 mL of conc. HNO3 to the sample and assemble the digestion vessel and cover fittings with a single rupture membrane rated for 200 psig (1380 kPa) maximum working pressure 2.

Isostatic presses capable of achieving a maximum working pressure of 69 MPa or greater having a chamber cavity with an inside diameter in excess of 152 mm and specially designed dies, molds, controls or specially designed software therefore.

Diaphragm Accumulator (Technical Data) Material: Steel shell, ELECTRON BEAM welded Non-repairable Working Pressure: 120 to 250 Bar See table below for maximum working pressure per model.

It acts as a quick connect coupling and also may be used as a blow gun with a maximum working pressure of 725 p.s.i. It is equipped with a zinc needle valve and is operated by hand by means of a lever.

Specifications Built in trolley Brass connectors 90 bar maximum working pressure High volume flow rate (7lt/min) Powerful single phase motor Lance 7 metres of high pressure hose Hose connector Detergent bottle Guarantee One Year manufacturer's guarantee.

Surge control is the use of different techniques and equipment in a hydraulic system to prevent any excessive gain in pressure (also known as a pressure surge) that would cause the hydraulic process pressure to exceed the maximum working pressure of the mechanical equipment used in the system.

(chaudière à vapeur basse pression) "maximum allowable working pressure" means the maximum working pressure that is specified by the manufacturer in the plans and specifications accepted and registered by the provincial authorities and that is set out in the record referred to in section 5.18.

PEGASUS F3 boilers ore designed for use with fully pumped indirect beating systems up to a maximum working pressure of 4 bar and flow temperature of 82°C. The PEGASUS F3 range incorporates a permanent pilot with thermocouple flame failure device.