Magnet wire production became an especially vital component to the city's economy.

One of the major uses is as a magnet wire enamel.

Smaller diameter magnet wire usually has a round cross section.

Aluminium magnet wire is sometimes used as an alternative for large transformers and motors.

The second factor in figuring out response time of a coupling is actually much more important than the magnet wire or the air gap.

Expansion followed the company's discovery that the product would also remove film insulation from magnet wires.

Film insulated magnet wire permits a manufacturer to obtain the maximum number of turns within the available space.

Due to this, copper magnet wires contribute to improving energy efficiency in equipment such as electric motors.

Polyamide-imides are used extensively as wire coatings in making magnet wire.

He worked on doggedly, winding fine magnet wire on a noticeably complicated metal form.

Single-strand copper conductors are typically used as magnet wire in motors and transformers.

Previously, magnet wire was insulated with cloth.

The magnet wire was wound with rags for insulation, and pieces of spring brass were used for keys.

The most suitable materials for magnet wire applications are unalloyed pure metals, particularly copper and aluminium.

When factors such as chemical, physical, and mechanical property requirements are considered, copper is considered the first choice conductor for magnet wire.

Thicker magnet wire is often square or rectangular (with rounded corners) to provide more current flow per coil length.

For ease of manufacturing, most new magnet wire has insulation that acts as a flux when burnt during soldering.

Pickup position, number of coil winds, type of magnet wire, magnets and other factors shape the sound.

The voice coil itself is shaped rather like an arrowhead, and made of doubly coated copper magnet wire.

Therefore, they are used in the electronics industry for flexible cables, as an insulating film on magnet wire and for medical tubing.

Older magnet wire is normally not like this, and requires sandpapering or scraping to remove the insulation before soldering.

Other businesses include a unit that makes magnet wire and insulation materials for motors, transformers and electrical controls.

Coils are typically wound with enamelled copper wire, sometimes termed magnet wire.

Until George Jacobs invented a practical enamel for the purpose, cloth was used to insulate magnet wire.

The rotor can take the form of a winding-filled cylinder, or a self-supporting structure comprising only the magnet wire and the bonding material.