The finished blocks are cured rather than fired using low-pressure steam.

Today, these machines are usually powered by small diesel engines or electric motors, but may also use low-pressure steam.

The main difference between how high-pressure and low-pressure steam engines work is the source of the force that moves the piston.

Low-pressure steam enters the vessel through a sparger in the bottom of the vessel.

In certain applications, a low-pressure steam autoclave can replace an ordinary curing oven.

He designed a new type of low-pressure steam heating system, Trane vapor heating.

Heating was provided by low-pressure steam.

The heat given off by the process gas and the condensation heat evolved are utilized to produce medium or low-pressure steam.

This drove a low-pressure steam turbine.

Driving the engines by the pressure differential between low-pressure steam and a partial vacuum raised the possibility of reciprocating engine development.

However, the steam generators in many large industrial facilities such as petroleum refineries may use whatever low-pressure steam is available.

The low-pressure steam heating system was swapped with a connection to the city's central heating system.

The intention was to save fuel by using high-pressure steam, which is thermodynamically more efficient than low-pressure steam.

This engine has two cylinders instead of single-cylinder old engine, it contains high-pressure and low-pressure steam cylinder.

He frowned, recalling a passage from one of Dorrin's old texts, claiming that anything other than low-pressure steam engines would be impossible without using black iron.

He also developed a low-pressure steam turbine, since most 1910 vintage steam engines were built for steam and not sun-heated water.

The generated power was sold to the Israel Electric Corporation, and low-pressure steam was supplied to an adjacent industrial complex.

With new kinds of turbines, an open-cycle system might scale up to plants no bigger than about 10 megawatts since efficiency is limited by the low-pressure steam.

Crocodile eventually arrived back at Portsmouth on 30 December 1893, having travelled using only the low-pressure steam cylinder, and was not further employed for trooping.

Large Corliss engines cannot be safely started cold, so it is common to admit low-pressure steam to both sides of the cylinder to warm up the metalwork.

Downstream of the turbine, medium-pressure steam was piped to the plant for knitwear pressing, and low-pressure steam was used to provide air conditioning.

In closed-cycle OTEC, the specific volume of low-pressure steam is very large compared to that of the pressurized working fluid.

Upon completion, the building contained three courtrooms, twelve offices, five fire-proof vaults, electric lighting, low-pressure steam heating and a complete plumbing and draining system.

The power of the low-pressure steam would assist the vacuum created by the condensation, increasing the power of the down stroke, and the speed of the engine.

In the Olympic class, further compounding was achieved by using the exhaust steam from these engines to drive a low-pressure steam turbine driving a smaller central propeller.