liquid seal

Meters that rely on a liquid seal create a relatively low pressure drop.

A liquid seal is created through the structure of the filler pipe.

The polished rod and stuffing box combination is used to maintain a good liquid seal at the surface.

The oil floats on the surface of the water and creates a liquid seal preventing further evaporation.

Ferrofluids are used to form liquid seals around the spinning drive shafts in hard disks.

Liquid Seal has a built-in latent curing mechanism which is activated by the loss of water.

To maintain pressure on a separator, a liquid seal must be effected in the lower portion of the vessel.

The Cervo also received some minor updates across the line, with new liquid seal engine mounts and suspension changes.

Liquid Seal has excellent high built properties and under favourable conditions coating thickness of up to 2mm wet may be obtained in one single application.

A liquid seal is much better for smaller vehicle; however, the larger vehicle usually use a mechanical seal.

In the drying/curing process of a Liquid Seal membrane there are therefore three distinct stages:

It was used as the earliest glass-to-metal seal and is still in use for liquid seals for e.g. rotary shafts.

A hermetic seal, usually a liquid seal, is employed; a turbine oil at pressure higher than the hydrogen inside is typically used.

Liquid seal for Stirling piston (video)

This liquid seal prevents loss of gas with the oil and requires the use of a liquid-level controller and a valve.

It can be used as a liquid seal up to high temperatures or even at lower temperatures when alloyed with other metals (e.g. as galinstan).

Magnetic liquid seals are engineered for a wide range of applications and exposure but are generally limited to sealing gases and vapors, not direct pressurized liquid.

Any cracks, joints or holes should prior to application of Liquid Seal be filled with Chempatch Universal Repair and Patching Compound.

Magnetic liquid seals are used in rotating equipment to enable rotary motion while maintaining a hermetic seal by means of a physical barrier in the form of a ferrofluid.

Liquid Seal may be applied to most surfaces without priming provided they are clean, free from grease, oil and any loose matter, and where necessary have been mechanically and chemically cleaned.

They have developed a liquid seal designed to be mounted outside existing conventional seals on pumps at chemical plants and petroleum refineries to contain emissions of volatile hydrocarbons, which contribute to smog.

Liquid Seal is a water based membrane for the sealing and long term protection of external surfaces which combines a high degree of extensibility, with considerable cohesive strength and water resistance.

He gazed around--out the side walls of glistening quarsteel into the sea gloom, into the thick of the smooth, lithe, brown-skinned shapes that now and again poised pressing against the submarine, peering in with their liquid seal's eyes.

On porous or highly absorbent surfaces, such as for instance, cement sheeting and particularly under hot and dry conditions, it will be neccssary to dilute the first coat of Liquid Seal With water to ensure satisfactory penetration and keying.

Liquid seal flame arrestors are liquid barriers following the principle of a siphon where the liquid stops the entering deflagration and/or detonation and extinguishes the flame, they work by bubbling the gas through a non-flammable and ideally non-gas-absorbing liquid, which is typically water.