guide blade

So this will need either trimming or replacing with an alternative guide blade.

Otherwise the guide blade will hit the bottom of the track even on a perfectly good track section.

Don't use to much as it is a lubricant that will help the guide blade, but not the tyres when cornering!

Guide blade held by retaining nut, braids hold the motor wires in place.

Here you can see the reason for the engine noise - the cam chain guide blade (6) is cracked.

Probably this is partly caused by trimming the guide blade, but I would recommend some weight or a magnet at the front end.

The guide blade does not move.

The cars have working headlights, Magnatraction® system & self centering guide blade system.

The turbine blades were not cooled, but the guide blades for the first turbine stage were fabricated hollow.

One point worth noting is that if you intend to run on scalextric track you will need to trim the guide blade as it is very deep.

Developments such as thin-kerf guided blades and splined arbors have significantly improved sawing accuracy, reduced sawdust and permitted reductions in lumber target sizes.

This high velocity fluid then transfers its energy in a number of stages by employing many rotor blade rows separated by rows of fixed guide blades.

But he wanted the man alive, to woo and win him to friendship if possible, to use him to rule the Hitts and guide Blade to the choicest diamonds.

The other feature is a small switch that reverses the current to the motor so that you can run the car in the opposite direction without needing to swap the wires on the guide blade.

This instrument, the osteotome, had links of a chain carrying small cutting teeth with the edges set at an angle; the chain was moved around a guiding blade by turning the handle of a sprocket wheel.

The decrease in the absolute velocity of the fluid across the two rotor blade rows (R and R) is due to the energy transfer; the slight decrease in the fluid velocity through the fixed guide blades (F) is due to losses.