curing agent

It is also used as a curing agent for epoxy.

Several other types of curing agents are also used in the advanced composite industry.

Curing agent predominately used with Bostik 2402, but clear in colour.

Red lead is used as a curing agent in some polychloroprene rubber compounds.

Again, the choice of curing agent depends on the cure and performance characteristics desired for the finished part.

No discussion of homemade bacon is complete without a debate about using a nitrate, a curing agent.

Conversely, fairly large molecules may be made and joined together after application by relatively small amounts of curing agents.

A further difference is that droëwors does not contain curing agent as found in a traditional cured sausage.

Amidoamines can also serve as curing agents for epoxy resins.

The second of the essential ingredients of an advanced composite system is the curing agent or hardener.

Diethylenetriamine is a common curing agent for Epoxy-resins in epoxy adhesives.

Typical ingredients of curing agents that inhibit anaerobic bacteria include nitrates.

It is also reported to be used as a curing agent in the synthesis of polyurethane and for analytical determination of gold.

Curing agent shall have at least two years of successful field use and shall be approved by waterproofing manufacturer in writing.

In this process, liquid thermosetting resin is combined with a curing agent and injected into a mould.

Other curing agents are polyamides and polysulfide polymers.

The pavement should be clean, dry and free from oil, laitence, curing agents, dust and any loose materials.

It is chemically incompatible with paints relying on metal carboxylate curing agents.

Lactic acid is used as a food preservative, curing agent, and flavoring agent.

To produce the material, the silicone rubber is mixed with the curing agent or vulcanizing agent.

Spices, binders and curing agents are added, and the ingredients are mixed under vacuum.

Do not attempt to mix partial units, as the exact ratio of curing agent to base is essential for optimum performace.

In addition to curing agents, Air Products offers a full range of reactive diluents for civil engineering formulations.

Precursor to polymers: carbohydrazide can be used as a curing agent for epoxide-type resins.

The second most important part of FBE coatings is the curing agent or hardener.