stepper motor
step motor

For example, a stepper motor might turn exactly one complete revolution each second.

For example, we can have a thread controlling a stepper motor.

Stepper motors are often used for open-loop control of position.

Stepper motor performance is strongly dependent on the drive circuit.

The number of steps moved is controlled by the stepper motor controller.

Servomotors are generally used as a high performance alternative to the stepper motor.

The read/write head assembly is fastened to the stepper motor shaft.

The paper was moved by a stepper motor.

The telescope has stepper motor drive control with an electrical focusser.

It used a stepper motor to drive the moving mirror, recording the detector response after each step was completed.

Both the drum and the pen holder were controlled by stepper motors.

Shutters with high speed stepper motors can be used to create strobe effects.

A unipolar stepper motor has one winding with center tap per phase.

Stepper motors have a natural frequency of operation.

The y-direction sampling rate - This is determined by the precision of the stepper motor.

Should the print head be moved with the machine turned on, the sensitive stepper motor could be damaged.

A stepper motor moves in fixed increments called steps.

Computer-controlled stepper motors are a type of motion-control positioning system.

It is also used in stepper motors.

When the company was started, low end drives generally used stepper motors, which were slow, noisy, and prone to reliability problems.

What the user would do is remove the drive from its case and then loosen the screws holding the stepper motor that moved the head.

The arm is moved using a voice coil actuator or in some older designs a stepper motor.

The stepper motor in our example is able to move in increments equal to 1/300ths of an inch.

The control circuitry activates the paper feed stepper motor.