Dodatkowe przykłady dopasowywane są do haseł w zautomatyzowany sposób - nie gwarantujemy ich poprawności.
In these situations, the power is related to the mass flow rate.
Determine the mass flow rates of the air, and the makeup water.
Sometimes these equations are used to define the mass flow rate.
This is proportional to the mass flow rate of the sample.
Using the lower mass flow rate reduces the performance capabilities of the engine.
The mass flow rate can still be increased if the source pressure is increased.
The mass flow rate can be found using the following equation:
The changes observed represent the mass flow rate and density of the fluid.
The mass flow rate of fuel may be neglected.
The phenomenon occurs when mass flow rate changes significantly within a duct.
With appropriate pressure and temperature compensation, the mass flow rate can be accurately determined.
However, the turbine mass flow rate is required in order to calculate the stage efficiency.
Jet-engine thrust is governed by the general principle of mass flow rate.
In accordance with mass conservation, the mass flow rate must be constant.
Additional applications include the ability to predict the mass flow rate from geothermal wells.
But the density and resultant mass flow rate can be increased by increasing the inlet pressure.
This equation may be solved for the mass flow rate to yield Poiseuille's law.
Slip Factor being a function of mass flow rate because of back eddy.
This means that the air velocity in a system is fixed even though mass flow rate through the fan is not.
The area and mass flow rate are held constant for Rayleigh flow.
The same mass flow rate will remain constant in the flow path through each element of the system.
The mass flow rate, , through a surface of area is given by the following expression:
When the mass flow rate is not constant, the diameter of the fiber will vary to accommodate the variation.
A curve fitting method of third order was used in order to calculate the mass flow rate.
The mass flow rate is the mass of the fluid traveling past a fixed point per unit time.