hole spacing

Note how the hole spacing doesn't stay constant on this shape of back.

Parameters such as number of holes and hole spacing are entered.

The robot base does include some standard Meccano hole spacing.

On some, both bores have the same finger hole spacing and sound in unison.

Optional variable or fixed hole spacing at the design stage where no holes have been surveyed.

Antenna bolt hole spacings are marked on diagram above.

Drill hole spacing was on 80 metre sections.

In comparison to larger recorders, the fingering is relatively difficult because of the very tight hole spacing.

It may be possible to improve pre-split performance for a given hole spacing and charge distribution by introducing timing into the line.

On the discovery section (7832900N) and sections either side, drill hole spacing is generally 20 metres, with wider spaced to scout holes along strike.

Heavy Duty Belt drive Gearbox, Suitable for motors with 1" hole spacing and 1.5" diameter or less.

In fact, Gregory was one of the few mines to report that it adjusted hole spacing in the pre-split line to counter unfavourable jointing.

Drilling of Ginkgo has been completed on 29 traverses approximately 400 metres apart with hole spacings of 50 and 100 metres.

A program of infill drilling to a nominal hole spacing of 50 metres x 25 metres commenced utilising up to four drill rigs.

One major achievement of his as a pipemaker was to standardise hole spacings and reeds, so that his pipes are reliably in tune with one another.

As typical hole spacings for in-seam gas drainage holes are between 15 - 20cm a 7.6m deviation at the end of the hole would appear to be acceptable.

In image mode, accuracy is affected by the hole to hole spacing of the mask, the aspect ratio of the holes, and the CCD size.

Drilling is currently progressing northwards from the Boral property, infilling the previous drilling at 250 metre line intervals with 20 metre hole spacing.

Alternatively, where the pre-split program is rated successful for a given site, there is an option to trial increased hole spacing in conjunction with the dynamic notch effect.

Check that shaft bolt hole spacing matches cylinder heads and that rockers can rotate freely to allow valve to close leaving enough clearance to set lash.

Using charts that he made up from this very variable information to inform his own designs, he devised his own standardised hole spacings for a variety of pitches.

It has been suggested that it was made by Neanderthals as a form of musical instrument, its hole spacing and alignment leading to its being labeled a "Neanderthal flute".

Some components are now only available in BGA or microBGA packages and these determine hole spacing and, to a degree, the amount of interconnection needed between holes.

Despite the limited increase in inferred resources, there has been a significant increase in the confidence level in these resources and a significant reduction in the average drill hole spacing.