The magnetic field can be measured by a fluxgate compass.

The fluxgate compass with automatic deviation control - built in.

The fluxgate type is relatively good at providing data that finds magnetic sources.

These simple fluxgate magnetometers were used on many missions.

A fluxgate magnetometer measures the direction and magnitude of magnetic fields.

This would be undesirable behaviour in a transformer but is the essence of fluxgate operation.

This is the characteristic which is exploited in the design of a fluxgate compass.

Increasingly, electronic fluxgate compasses are used on smaller vessels.

There have been several types of fluxgate used in spacecraft, which vary in two regards.

The majority of early fluxgate magnetometers on spacecraft were made as vector sensors.

Each station is equipped with a state-of-the-art vector fluxgate magnetometer.

Explorer 10 had an abbreviated 52 hr mission with two fluxgate magnetometers on board.

The most common type of magnetometer used for marine survey is the fluxgate magnetometer.

The fluxgate on Explorer 6 was mounted along the spin axis to verify spacecraft tracking magnetic field lines.

The experiment consisted of a boom-mounted triaxial fluxgate magnetometer.

A three-axis fluxgate magnetometer to measure planetary and interplanetary magnetic fields.

The fluxgate magnetometer, which depends for its action on the detection of saturation occurring in magnetic material, can be made both small and highly accurate.

To convert it to a fluxgate transducer, the excitation is increased so as to force the core into saturation on alternate peaks.

To implement an active system, low-noise fluxgate magnetometers are mounted at the center of each surface and oriented orthogonally to it.

It can also be used to correct for the roll and heel-induced errors that often plague fluxgate compasses installed on steel vessels.

-Input from suitable fluxgate for North-up mode.

A CSC fluxgate vector magnetometer, used to measure the strength and direction of the magnetic field.

A fluxgate magnetometer consists of a small, magnetically susceptible core wrapped by two coils of wire.

The CSC fluxgate magnetometer is located inside the body and associated with a star tracking device.

Two different magnetometers were mounted: a vector helium magnetometer and a fluxgate magnetometer.