Firing temperature is thought to have been about 1,000 C or slightly higher.

Some years ago I started exploring with new forms at the lower firing temperatures.

We are also trying to bring the unit back to a nominal firing temperature.

How do we choose the right material to add to reduce the firing temperature of a glaze?

Also the production method and firing temperature is significant.

During manufacture a significant difference between cement and lime is the firing temperature.

Due to the low firing temperature, these objects are fragile and have high water absorption.

Helps to produce less porous bodies at lower firing temperatures.

For red earthenware, the firing temperature affects the color of the clay body.

Both are expected to rise with firing temperature.

The average firing temperature is about 850 degrees Celsius.

It has a lower firing temperature than Portland cement, and is thus less polluting.

He managed to increase the firing temperature of the coal further by putting a chimney on his stove.

Because of its low firing temperature, it is relatively easy to produce brightly coloured earthenware.

Firing temperatures can only be a rough guide.

Consequently the firing temperatures and glazes selection should be the same on those used with the clay body.

He built a small kiln to study the effects of firing temperatures on clay and shale.

They are the composition of charge, the firing temperature, the gas atmosphere and the reaction kinetics.

During the next seven days, round-the-clock shifts of students will add logs to maintain the proper firing temperature.

All Brayton cycles have higher potential for efficiency the higher the firing temperature.

The correct balance of flux, stabiliser and glass-former for the firing temperature.

The products would be gradually raised to their firing temperature and then allowed to cool before passing on to the next step in their manufacture.

In the 1940s, with the discovery of a clay that required a lower firing temperature, the pottery began producing flower pots.

Limit formulae indicate how much of each raw material should be used for each firing temperature.

Firing temperature was around 1200 degrees Celsius.