assembly joint

Mechanical assembly joints (field connections) to assemble structural elements 25.

Frame and panel construction, with all assembly joints dowelled.

It is used for gluing lumber or assembly joints that must withstand severe service conditions.

But the launching device itself is to be cut "at locations that are not assembly joints into two pieces of approximately equal size."

• Develop mechanical assembly joints for use between aluminum structures and wood or plastic structures.

Rotational moulding produces virtually stress-free products from a mould with no assembly joints to fail.

When detonated, the charge shall sever the tubes or launcher rails, tube or launcher rail bases and their rotatable parts, into two approximately equal parts in areas that are not assembly joints.

Assembly joints on the maze floor shall not involve steps of greater than 3 mm. The change of slope at an assembly joint shall not be greater than 4 degrees.

Profiles of 30 Projects Related to Primary and Secondary Aluminum Transformation Project 41 Mechanical Assembly Joints (Field Connections) to Assemble Structural Elements Timeframe: 0-3 years Description:

(A) the tail boom or tail part shall be severed from the fuselage so that the assembly joint is contained in the severed portion; and at least two transmission mounts on the fuselage shall be severed, fused or deformed.

(d) launcher chassis shall be cut at a location that is not an assembly joint into two pieces of approximately equal size.

For a canister made up of segments, each of the segments must be cut in two, at places other than assembly joints, or crushed, flattened, or destroyed by explosion.

Paragraph 4 of Section VI specifies the action that constitutes initiation of the elimination process for a heavy bomber or a former heavy bomber, i.e., as soon as the tail section with tail surfaces has been severed from the fuselage at a location obviously not an assembly joint.

In all cases, the cuts must be made at a location obviously not an assembly joint.