Fill the area above the nail head with waterproof wood putty.

Sand down the bumps and fill the holes with wood putty.

Later you can fill the holes with wood putty.

I filled the cracks with wood putty before repainting, but they returned.

Cover the nail heads with colored wood putty or filler.

Next he filled the edges around the wall in the closet with wood putty so it could not be detected.

Pellets of dough clung to his fingers like wood putty.

Then fill the holes with wood putty, sand the areas smooth and apply paint.

Then fill the holes above with colored wood putty or plastic filler.

Then apply wood putty, primer and caulking compound, as described earlier.

Cut the shelves to size, fill all cracks, holes and dents with wood putty.

Use colored wood putty to fill the depressions.

Fill the holes with wood putty, then paint the strips (except the foam parts) to match the door frame.

Then, after the glue dries, remove the nails and fill the holes with waterproof wood putty or paint.

Sink the nail heads below the surface using a nail set, then fill the depressions with wood putty.

Sink the fastener about an eighth of an inch below the surface and fill the depression with waterproof wood putty.

Most amateurs fill the nail hole and the dent with wood putty, but the filler is difficult to conceal.

Fill the area above each nail with waterproof wood putty, allow it to dry, then repaint and apply caulking.

Fill scratches, holes and other blemishes in the existing laminate with spackling compound or wood putty.

Amateurs can fill cracks in lesser-quality pieces by using light- or dark-colored wood putty made for use as crack filler.

An exterminator squirted powdered insecticide into the holes the bees had made, then patched with wood putty.

If you can't pull the nail out, you can drive it below the surface with nail set and fill the hole with wood putty.

Countersink all nail heads with the nail set and fill the resulting holes with wood putty.

Fill the holes with waterproof wood putty, then sand the areas and apply paint or clear finish to the wood before reinstalling the threshold.

Trim the excess screen with a utility knife, then fill the nail holes with wood putty and touch up with paint if necessary.