The more electrically suitable 75-ohm F connector is standard.

It is not related to the F connector common in RF equipment.

The cable is terminated on a television outlets, typically an F connector mounted on a face plate.

Cable-ready television sets have coaxial cable F connectors.

The F connector is attached to pins 5 and 6 on the last N connector at the end of the chain.

The installation requires the installation of a Pay TV outlet (F connector).

F connectors for RF input.

Thanks to television, RG-6 is the most commonly used coaxial cable for home use, and the majority of connections outside Europe are by F connectors.

F connector, used for domestic television installations and domestic satellite LNBs (75 Ω) world wide.

F connector (TV antenna/cable/satellite)

However, same as Europe, the 75-ohm F connector is used by Cable TV Hong Kong instead of Belling-Lee ones.

The IPmodem is a small plastic-cased mains powered unit with F connectors for connection to both receive and transmit sections of the iLNB.

Modern televisions consist of a display, antenna or radio frequency (RF) input (a TV aerial plug or an F connector), and a tuner.

Push-on F connector ends provide poor shielding against airborne signals (e.g., a nearby TV transmitter will interfere with a CATV station).

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz.

The iLNB combines the feedhorn and electronics for reception and transmission in one unit, and is provided with two F connectors for receive and transmit connection to the IPmodem.

Not all amplifiers contained a good return path test point, so the repair lab was asked to modify some line extender diplex filters to pass the forward, and divert the return path to an F connector.

DAB (digital radio) and other reception modes are not as severely affected by the impedance matching issue, so only HDTV and satellite reception systems are encouraged to use the F connector.

Unlike the coaxial F connector used today for the same purpose in North America, the IEC 61169-2 connector is not matched to the 75-ohm characteristic impedance of the antenna cable used, having an impedance closer to 50 ohms.

A typical TAE installation is a multi-socket junction box with at least one N connector and one F connector socket in the box, but having usually two N and one F connector.

The F connector is a coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable.

Passthrough was turned off when the RF modulator (typically on TV channel 3 or 4 in North America) was on, as this F connector was originally the only way to send the VCR output to older TVs, until unmodulated composite video and RCA connectors became common.

While downstream and upstream communications travel on a shared coax line in the customer premises, and connect to a single F connector on the cable modem, it is typical for the CMTS to have separate F connectors for downstream and for upstream communication.